The browser you are using is out of date and may not support all of the features of this website. Please update your browser to a modern browser that supports HTML5.

Geology banner

Regents’ Engineering Pathways Program (REPP)

The Regent’s Engineering Pathways Program (REPP) was established in 2016 to replace the RETP.  These changes to the program allow REPP Partner institutions to develop pre-engineering programs whereby the students complete two or more years of coursework at their home institutions before transfer to REPP participant schools.  REPP participant schools include the Georgia Institute of Technology, Georgia Southern University, Kennesaw State University, the University of Georgia and Mercer University.  In addition, GSW has separate transfer guidelines with the Samuel Ginn College of Engineering at Auburn University, which allows our pre-engineering students to continue their education outside the State of Georgia if they choose to do so.

In the REPP, students enroll for their first two or more years of course work at Georgia Southwestern, where they can complete all of the required mathematics and science courses, as well as other core requirements of the engineering curriculum. Students who successfully complete REPP requirements at GSW may be accepted as transfer students to a participant institution, and are able to continue their work toward completion of a Bachelor of Science in Engineering degree.  Please note that successful completion of courses at GSW does not guarantee transfer admission to an engineering program at a REPP participant school.

Admission Requirements for REPP Programs

  • The information below is a curriculum roadmap.
  • Following this curriculum does not guarantee admissions into an REPP Engineering Institution or Auburn University.  In addition the student must meet application and transfer deadlines outlined by the REPP Engineering Institution or Auburn University.

Georgia Institute of Technology

Upon successful completion of mathematics, science, and engineering course requirements at GSW, students may be admitted to Georgia Tech to complete an Engineering bachelor's degree.

  • Students must meet REPP institution and Georgia Tech admission requirements. Georgia Tech admissions requirements must be met at the time they submit their transfer application to Georgia Tech.
  • Students must complete a minimum of 30 credit hours at GSW prior to transferring to Georgia Tech (the recommended total is 60 credit hours). These transfer credit hours must include courses that are part of the Georgia Tech course requirements for transfer and must be completed post high school graduation.
  • No more than one math or lab science course requirement may be in progress at the document deadline (spring and summer term applicants only).
  • Students not enrolled within GSW for more than two consecutive semesters must re- enroll for a minimum of one semester prior to their REPP application to Georgia Tech.

Details about the admission requirements for specific majors can be found on the Georgia Tech College of Engineering website:
http://admission.gatech.edu/transfer/transfer-partnership-programs

Georgia Southern University 

Students must apply for admission to Georgia Southern during the application filing period for the semester in which they wish to transfer. They must satisfy general admission requirements for Georgia Southern, including being in good standing at GSW at the time of transfer.

  • Students must complete a minimum of 30 semester credit hours (the recommended total is 60 credit hours) from a list of approved transfer courses with grades of at least a “C” and a minimum cumulative GPA of 2.5 in those courses at the time of transfer. The REPP Coordinator at GSW will meet with the Allen E. Paulson College of Engineering & Information Technology (CEIT) Director of Transfer and Co-op Programs to agree upon a set of approved courses specific to that institution.
  • Students must have a cumulative GPA, math GPA, science GPA and engineering GPA of at least 2.5 at the time of transfer.
  • Other general education core curriculum transfer credits will be accepted based on the transfer rules established by the Board of Regents of the University System of Georgia.

For more information please consult the following website:
http://ceit.georgiasouthern.edu/degrees/repp/rep-transfer-to-gsu- requirements/

Kennesaw State University

Students must meet transfer student admission requirements; complete the appropriate courses for the major in a published curriculum chart with a cumulative grade point average (GPA) and a GPA in math and science courses of 2.7.

For more information please consult: http://engineering.kennesaw.edu/

Mercer University 

Students who transfer into the School of Engineering must have a minimum of 2.5 GPA in all college enrollments. In addition, students must also have a 2.5 GPA or higher in all college mathematics, science, and engineering courses (excluding developmental mathematics courses). They must also be in good standing, that is, not on warning, probation, suspension, or equivalent. The School of Engineering will consider transfer students at any stage in their education after successfully completing Calculus I (MAT191).

Transfer students who seek full admission to the School of Engineering BSE degree program must satisfy the following conditions:

  • Have a minimum of a 2.5 GPA in all college enrollments.
  • Have a 2.5 GPA or higher in all degree relevant college math, science and engineering courses attempted. Courses are considered degree relevant only if they could be used (were an appropriate grade earned) to satisfy degree requirements in the specialization or program to which the student is seeking transfer admission. For the purpose of this computation, all attempts or individual courses are included.
  • Have completed courses the following courses at GSW: CHEM 1211 (General Chemistry I), PHYS 2211 (Principles of Physics I), MATH 1120 (Calculus I), MATH 2221 (Calculus II).
  • Be in good standing at GSW prior to transfer, that is, not on warning, probation, suspension, or the equivalent.

Conditional admission for transfer students to the BSE degree program is possible for students who have completed a course which transfers as MAT 191 (MATH 1120 at GSW) and have not yet completed CHM 111 (CHEM 1211), PHY 161 (PHYS 2211), and MAT 192 (MATH 2221), but who are otherwise eligible. For more information, please consult the following website: 

https://www.bethebear.com/transfer-admissions.cfm

University of Georgia 

Students from GSW may be admitted to the University of Georgia to complete any one of the eight Engineering bachelor's degree programs. Students must submit the regular transfer admission application form along with a recommendation form from the GSW REPP Coordinator. The criteria for transfer students include the following:

  • Complete a minimum of 30 college credit hours after high school.
  • Must meet REPP institution and University of Georgia admission requirements at the time of application.
  • One completed college course in math and/or laboratory science.
  • If applicable, must meet High-Demand-Major requirements for the intended degree.

More details about the admission requirements for specific majors can be found on the University of Georgia College of Engineering website:  http://engineering.uga.edu/college- engineering

 

Auburn University Transfer Guidelines 

Students must apply for admission to Auburn University and must satisfy all general admission requirements at the time of transfer. The criteria for transfer students include the following:

  • Must have completed 30 or more semester credit hours at GSW.
  • Must have obtained a 2.5 cumulative GPA.
  • Must have completed the required core courses: ENGL 1101, ENGL 1102, mathematics courses, history courses, and natural science courses with laboratories.
More details about the engineering program at Auburn can be found at the Samuel Ginn College of Engineering website:  
http://www.eng.auburn.edu/

 

Contact Information

Dr. Svilen Kostov
Department of Geology & Physics
Office: Science Bldg 114
Phone: 229-931-2321
Email: Svilen.Kostov@gsw.edu

Admission Requirements REPP Programs

   The information below is a curriculum roadmap.

   Following this curriculum does not guarantee admissions into an REPP Engineering Institution or Auburn University. In addition the student must meet application and transfer deadlines outlined by the REPP Engineering Institution or Auburn University.

 

Georgia Institute of Technology

Upon successful completion of mathematics, science, and engineering course requirements at GSW, students may be admitted to Georgia Tech to complete an Engineering bachelor's degree.

     Students must meet REPP institution and Georgia Tech admission requirements. Georgia Tech admissions requirements must be met at the time they submit their transfer application to Georgia Tech.

     Students must complete a minimum of 30 credit hours at GSW prior to transferring to Georgia Tech (the recommended total is 60 credit hours). These transfer credit hours must include courses that are part of the Georgia Tech course requirements for transfer and must be completed post high school graduation.

     No more than one math or lab science course requirement may be in progress at the document deadline (spring and summer term applicants only).

     Students not enrolled within GSW for more than two consecutive semesters must re- enroll for a minimum of one semester prior to their REPP application to Georgia Tech.

 

Details about the admission requirements for specific majors can be found on the Georgia Tech College of Engineering website. http://admission.gatech.edu/transfer/transfer-partnership- programs

 

Georgia Southern University

Students must apply for admission to Georgia Southern during the application filing period for the semester in which they wish to transfer. They must satisfy general admission requirements for Georgia Southern, including being in good standing at GSW at the time of transfer.

   Students must complete a minimum of 30 semester credit hours (the recommended total is 60 credit hours) from a list of approved transfer courses with grades of at least a “C” and a minimum cumulative GPA of 2.5 in those courses at the time of transfer. The REPP Coordinator at GSW will meet with the Allen E. Paulson College of Engineering & Information Technology (CEIT) Director of Transfer and Co-op Programs to agree upon a set of approved courses specific to that institution.

   Students must have a cumulative GPA, math GPA, science GPA and engineering GPA of at least 2.5 at the time of transfer

   Other general education core curriculum transfer credits will be accepted based on the transfer rules established by the Board of Regents of the University System of Georgia. For more information please consult the following website http://ceit.georgiasouthern.edu/degrees/repp/rep-transfer-to-gsu- requirements/

 

Kennesaw State University

Students must meet transfer student admission requirements; complete the appropriate courses for the major in a published curriculum chart with a cumulative grade point average (GPA) and a GPA in math and science courses of 2.7. For more information please consult http://engineering.kennesaw.edu/

 

Mercer University

Students who transfer into the School of Engineering must have a minimum of 2.5 GPA in all college enrollments. In addition, students must also have a 2.5 GPA or higher in all college mathematics, science, and engineering courses (excluding developmental mathematics courses). They must also be in good standing, that is, not on warning, probation, suspension, or equivalent. The School of Engineering will consider transfer students at any stage in their education after successfully completing Calculus I (MAT191).

 

Full Admission for Transfer Students to the BSE Degree Program

Transfer students who seek full admission to the School of Engineering BSE degree program must satisfy the following conditions:

   Have a minimum of a 2.5 GPA in all college enrollments;

   Have a 2.5 GPA or higher in all degree relevant college math, science and engineering courses attempted. Courses are considered degree relevant only if they could be used (were an appropriate grade earned) to satisfy degree requirements in the specialization or program to which the student is seeking transfer admission. For the purpose of this computation, all attempts or individual courses are included.

   Have completed courses the following courses at GSW: CHEM 1211 (General Chemistry I), PHYS 2211 (Principles of Physics I), MATH 1120 (Calculus I), MATH 2221 (Calculus II)

   Be in good standing at GSW prior to transfer, that is, not on warning, probation, suspension, or the equivalent.

 

Conditional Admission for Transfer Students to the BSE Degree Program is possible for students who have completed a course which transfers as MAT 191 (MATH 1120 at GSW) and have not yet completed CHM 111 (CHEM 1211), PHY 161 (PHYS 2211), and MAT 192 (MATH 2221), but who are otherwise eligible. For more information, please consult the following website https://www.bethebear.com/transfer-admissions.cfm

 

University of Georgia

Students from GSW may be admitted to the University of Georgia to complete any one of the eight Engineering bachelor's degree programs. Students must submit the regular transfer admission application form along with a recommendation form from the GSW REPP Coordinator. The criteria for transfer students include the following:

   Complete a minimum of 30 college credit hours after high school

   Must meet REPP institution and University of Georgia admission requirements at the time of application

   One completed college course in math and/or laboratory science

   If applicable, must meet High-Demand-Major requirements for the intended degree

 

More details about the admission requirements for specific majors can be found on the University of Georgia College of Engineering website. http://engineering.uga.edu/college- engineering

 

Auburn University Transfer Guidelines

Students must apply for admission to Auburn University and must satisfy all general admission requirements at the time of transfer.

The criteria for transfer students include the following:

     Must have completed 30 or more semester credit hours at GSW

     Must have obtained a 2.5 cumulative GPA

     Must have completed the required core courses: ENGL 1101, ENGL 1102, mathematics courses, history courses, and natural science courses with laboratories.

More details about the engineering program at Auburn can be found at the Samuel Ginn College of Engineering website: http://www.eng.auburn.edu/ .

GSW Website Search

×

Email Access

To login into email, please select if you are a student or Faculty/Staff

Student Email    Faculty/Staff Email   Manage Spam Quarantine (Employees)

×

Apply to GSW

Thank you for your interest in Georgia Southwestern. What would you like to apply for?

Undergraduate Admissions    Graduate Admissions    Check Admission Status

×

D2L Access

To login into D2L, please select GeorgiaView or GoView option

GeorgiaView    GoView

×

Site Login

You can use this portal to login to the GSW website.  This will allow you to make instant edits to your pages. If you do not have an account and are a GSW Faculty/Staff member please click here.

Please be sure to logout when you are done!

×